CNC Prog/op/setter Spring Engineering Exeter's leading technical and engineering recruitment specialists are looking to recruit an experienced CNC programmer/operator/setter to join an experienced team with our prestigious client based just outside of Exeter. Must be able to operate in a Team environment and work to tight timescales Attention to detail Qualifications / Experience required Apprentice Qualified or sim ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Employee
Job Status:
Full Time
Tact Personnel
Devon, SW
Nov 25
CNC MACHINIST CNC MACHINIST This is an opportunity to be part of an Australian owned medium sized engineering firm located North West of Melbourne. We are looking for a person who is proficient in CNC Machining Centres and you must have Trade Qualifications, CNC Lathe Skills, CNC Machining Skills and CMM Experience to be considered for this position. The successful candidate will be offered an excellent wage an ...[more]
Job Type:
Employee
Job Status:
Full Time
Leader Newspapers
Melbourne, VIC 3000
Nov 25
MACHINIST WANTED MACHINIST WANTED FOR IMMEDIATE START. MUST be trade Qualified with CNC programming experience. Ongoing role for the right person on the Northside of Brisbane. Please call Teneille on 3238 0800 and email resume to tsemple@awx.com.au This ad appeared in The Courier Mail on 25-11-200 ...[more]
Job Type:
Employee
Job Status:
Full Time
The Courier Mail
Bowen Hills, QLD 4006
Nov 24
CNC Machinist Aerotek CE is currently seeking several CNC Machinists for a well respected company in the Germantown, OH area. They are looking for candidates with the following experience: -Experience operating CNC vertical and horizontal machining centers -Must be able to inspect parts for defects and other anomalies -Must be able to use a wide variety of measuring instruments such as micrometers, indicators, c ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract
Job Status:
Full Time
Aerotek
Germantown, OH 45327
Nov 24
Test Technician - Electrical/Mechanical/Medical Device 20.19-21.63 $/hr IMMEDIATE OPPORTUNITY in Minneapolis MN for a Mechanical Test Technician to work with a Worldwide Manufacturer of Medical Equipment. This is a contract position lasting 4 to 5 months. Local Candidates Only Responsibilities Provide support to Neuro Therapy Delivery Test Development by assisting in the testing of leads and catheters Perform assembly level DVT testing. Experience and knowledge of run ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract
Job Status:
Full Time
Salary:
From 20.19 to 21.63 USD per hour
THINK ENERGY GROUP
Minneapolis, MN 55405
Nov 24
Lathe Machinist A local manufacturing company in Dallastown, PA is seeking a qualified machinist with experience performing set ups, adjustments and operation of CNC Lathes. PAY: $18-$20 (based on experience) SHIFT: 1st Shift QUALIFICATIONS: - Experience performing Conversational and/or G-Code programming desired - CNC Lathe operation, set ups and adjustments required - Quality control inspections and measuring r ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract
Job Status:
Full Time
Salary:
From 18.00 to 20.00 USD per hour
Aerotek
Dallastown, PA 17313
Nov 24
Sr Programmer / Sr machinist Job Role: The Senior programmer / Machinist will work independently and manage work responsibilities per schedule requirements. The position is located in Katy Tx. Required skills are typically acquired through a minimum of 15 years experience in machine technology. Job Requirements: · Perform CNC programming, setups, and prototype runs on mills, lathes, and mill-turn centers. · Program in offline ...[more]
Relevant Work Experience:
More than 15 Years
Career Level:
Experienced (Non-Manager)
Education Level:
High School or equivalent
Job Type:
Employee
Job Status:
Full Time
Salary:
From 25.00 to 35.00 USD per hour
Enventure Global Technology
Katy, TX 77494
Nov 24
Wood Machinists Granville Location Immediate start on the Afternoon Shift Negotiable rates based on experience With their peak season just around the corner, Wood Machinists are urgently required for busy specialist education and commercial furniture manufacturer. Negotiable rates + overtime and super View to permanency Afternoon shift You will be based at their Granville facility with onsite parking available. Y ...[more]
Job Type:
Temporary / Contract
Job Status:
Full Time
Kelly Services
Granville, NSW 2000
Nov 24
Experienced Machinist EXPERIENCED MACHINIST Paradigm Tool & Manufacturing is currently looking for an Experienced Machinist . Responsibilities and Requirements Include: Milling and Turning Short Runs and Prototypes CNC and Conventional Programming experience is helpful Modern A/C shop Must have own tools Must be able to follow blueprints/drawings, using precision measuring equipment Paradigm Tool & Manufacturing Compan ...[more]
Job Type:
Employee
Job Status:
Full Time
Paradigm Tool & Manufacturing
Hatboro, PA 19040
Nov 24
CNC Lathe Machinist My client is seeking a qualified CNC Lathe Machinist. JOB DESCRIPTION: - Setting Up, Operating, Programming CNC Lathe Machines. - FANUC Controls (not a must) - HARDINGE (not a must) - $25.00/hr QUALIFICATIONS: - Programming CNC Lathe Machines - Working in a Job Shop environment - Organized, neat and clean - Must be good with Math - G & M Codes - 3rd Shift - Train on 1st shift for 2 weeks - $25.00/ ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Employee
Job Status:
Full Time
Salary:
25.00 USD per hour
Aerotek
North Wales, PA 19477
Nov 24
Lathe Machinist The lathe machinist performs a complete range of operations on all types of materials on a lathe, or a mill, or an N/C mill, or a grinder, or an EDM, or on a hone or lap. He/She is not required to be an expert in more than one family (lathes, mills, grinder, etc.) of machines. In his/her area of specialty, the incumbent performs set-ups and all other machinist level functions. He/She will be requi ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Employee, Temporary / Contract
Job Status:
Full Time, Per Diem
ENTEGEE Engineering Tech Grp.
Buffalo, NY
Nov 24
R&D Technician A medical device company in Kendall is looking to hire an experienced R&D technician. RESPONSIBILITIES: - Assist R&D engineers & medical staff members to conceptualize new products and surgical techniques - Assist project teams in establishing specifications and quality standards - Work with engineers to conceptualize tests used to evaluate device performance and safety - Design simple test jigs a ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract
Job Status:
Full Time
Aerotek
Miami, FL 33133
Nov 24
CNC Machinist A high precision contract manufacturer in the central Pennsylvania area is seeking an experienced CNC Machinist. Qualified candidate must possess at least 3 years of CNC programming and multi-axis machine operating experience. This candidate must also be able to manage multiple projects, work independently to complete complex setups, and operate CNC lathes, vertical and horizontal machining center ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract
Job Status:
Full Time
Aerotek
South Williamsport, PA 17702
Nov 24
Experienced R&D Technician A medical device company in Kendall is looking to hire an experienced R&D technician. RESPONSIBILITIES: - Assist R&D engineers & medical staff members to conceptualize new products and surgical techniques - Assist project teams in establishing specifications and quality standards - Work with engineers to conceptualize tests used to evaluate device performance and safety - Design simple test jigs a ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract
Job Status:
Full Time
Salary:
From 17.00 to 21.00 USD per hour
Aerotek
Miami, FL 33133
Nov 24
Machinist A Job Title: Machinist A Location: Stafford, TX Reporting to: 1 ST Shift Production Supervisor Tyco Flow Control is one of the major business segments of Tyco International Ltd and is one of the world’s largest manufacturers of flow control products and heat-tracing solutions that move, control and sample liquids, gases and powders for the oil and gas, power, food and beverage, chemical, water and o ...[more]
Job Type:
Employee
Job Status:
Full Time
Flow Control
Stafford, TX 77477
Nov 23
CNC Machinist Local Manufacturing company is looking for CNC machinists. Qualified candidates will have at least three years experience working with CNC machines/mills and lathes. Set up on CNC Mills/Lathes is a plus. Candidates must have their own tools. If you are interested please reply directly to this posting or call 719-277-6022. Required Skills: CNC MACHINING, MANUFACTURING, SET-UP Join Aerotek Commercia ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract
Job Status:
Full Time
Salary:
From 12.00 to 15.00 USD per hour
Aerotek
Colorado Springs, CO 80903
Nov 23
CNC Operator/Machinist JOB RESPONSIBILITIES: A position is responsible for setting up, operating, creating and editing programs accurately and efficiently on all PCD and carbide grinding equipment including CNC and manual grinders, as well as setting up for a variety of products on the Wire EDM Machine and making all parts per specified blue print tolerances without scrap or rework. Work should be performed in a highly o ...[more]
Relevant Work Experience:
5+ to 7 Years
Career Level:
Experienced (Non-Manager)
Education Level:
High School or equivalent
Job Type:
Employee
Job Status:
Full Time
Salary:
From 22.00 to 25.00 USD per year
RCM Technologies
Waukesha, WI
Nov 23
Journeyman CNC Machinist Job Purpose: Produces machined parts by programming, setting up, and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Duties: * Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machi ...[more]
Relevant Work Experience:
10+ to 15 Years
Career Level:
Experienced (Non-Manager)
Education Level:
Certification
Job Type:
Employee
Job Status:
Full Time
The Cleveland Punch & Die Comp
Ravenna, OH 44266
Nov 23
CNC Tool Setting / Sharpening Technician CNC Tool Setting/Sharpening Technician – 1 st Shift Description : Seeking an experienced CNC machinist who can organize, select and pre-set tooling for CNC Lathes and Mills. Set-up and sharpen various types of tooling used for multi-axis Vertical & Horizontal Milling Machines in an Aerospace Manufacturing Environment. Position Requirements : v Extensive experience in the appropriate selection and s ...[more]
Relevant Work Experience:
2+ to 5 Years
Career Level:
Experienced (Non-Manager)
Job Type:
Employee
Job Status:
Full Time
Marotta Controls, Inc.
Montville, NJ 07045
Nov 23
CNC PROGRAMMER We are in the process of screening and interviewing for CNC Programmers/ Machinists for the Contract Manufacturing Industry. Any candidate that feels they have the experience necessary should realize that this position is responsible for making precision parts from sketches and or drawings using both CNC and Manual Machines. This position will require all candidates to work directly with and to re ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract
Job Status:
Full Time
Salary:
From 25.00 to 30.00 USD per hour
Aerotek
Concord, CA 94520
Nov 23
CNC Machinist -experienced Job Description: Adecco has a great opportunity for an experienced CNC Machinist at an Erie County manufacturer. If you have at least 3 years experience in CNC set-up and programming with a thorough knowledge of G-codes, blueprint reading and experience working with high tolerances, please contact us today! Adecco Employment Services is the largest staffing firm in the world connecting more people ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract
Adecco
Cranesville, PA 16410
Nov 23
Machinist/Toolmaker - ProtoTRAK CNC Adecco Engineering and Technical, a division of the world leader in the recruitment of engineering and information technology professionals, has an immediate opening with a leading company. In this position candidates will be working on machining of a prototype product. Machines used include: Proto-Trak lathe and miller in the tool room Candidate should have some programming experience, as well as ...[more]
Relevant Work Experience:
5+ to 7 Years
Career Level:
Experienced (Non-Manager)
Education Level:
High School or equivalent
Job Type:
Temporary / Contract
Adecco Engineering & Technical
New Hartford, CT 06057
Nov 23
CNC Machinist Several clients in the Green Bay area are currently looking for qualified CNC Machinists to assist in production. These are immediate opportunities available on all shifts. These opportunities exist in job shop environments where responsibilities will include reading & interpreting blueprints, writing and editing programs, performing set-ups, and operation of VMCs. To be considered, qualified cand ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract
Job Status:
Full Time
Salary:
From 15.00 to 22.00 USD per hour
Aerotek
Green Bay, WI 54301
Nov 23
Vertical Machining Centre Programmer Title: CNC vertical machining centre, programmer, haas controls Location: South Yorkshire, commutable from Doncaster, Barnsley, Wakefield, Rotherham, Sheffield, Peniston. Apprenctice trained, experienced CNC Vertical Machining Centre, Haas programmer required. Will also be working on lathes CNC and manually controlled. Proof of apprenticeship/ qualifications certifcate is essential as requested by ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Employee
Job Status:
Full Time
Salary:
From 370.00 to 400.00 GBP per week
Kinetic Skilled & Trades
Apprenctice trained, Yorkshire
Nov 23
CNC Mill Machinist My client is seeking a qualified CNC Mill Machinist. JOB DESCRIPTION: - Setting Up, Operating, Programming CNC Haas Mill Machines - Background in one of the following: - MasterCam - EasyCam - FeatureCam - Programming done separately from the machine using a Computer QUALIFICATIONS: - Programming CNC Haas Mill Machines - Working in a Job Shop environment - Organized, neat and clean Required Skills: ...[more]
